|
|
Post by Quadguy on Oct 28, 2003 22:17:31 GMT -5
Does it really work then? Can you fell the more HP from it?
|
|
4strokekiller
Private
wanna run? u beat the blaster then your done cause the 500 will crush you
Posts: 198
|
Post by 4strokekiller on Oct 28, 2003 22:20:07 GMT -5
Yes, y6ou can tell the difference especially in throttle response and really helps out with low end pull, hope this helps.
|
|
|
|
Post by |~RaYne~| on Nov 1, 2003 9:11:48 GMT -5
will i lose any of my top end?
|
|
4strokekiller
Private
wanna run? u beat the blaster then your done cause the 500 will crush you
Posts: 198
|
Post by 4strokekiller on Nov 1, 2003 17:56:51 GMT -5
No, it just speeds thing up a little bit in the lower end. I really like it and think they are the best bang for the buck, 2 hp for 25 dollars, pretty good.
|
|
|
|
Post by |~RaYne~| on Nov 2, 2003 19:14:46 GMT -5
that aint bad
|
|
|
|
Post by Quadguy on Nov 5, 2003 0:42:03 GMT -5
Same here. Is there another company that make degree keys other than Vito's? |
|
|
|
Post by |~RaYne~| on Nov 5, 2003 9:26:23 GMT -5
i seen one made by some one eles but i dont remember who..........
|
|
|
|
Post by JeSse on Nov 5, 2003 20:06:08 GMT -5
ya i think someone esle does i will find out
|
|
|
|
Post by Quadguy on Nov 5, 2003 22:45:26 GMT -5
Great then. Where do you install the degree key at?
|
|
|
|
Post by dragginblaster on Nov 29, 2003 18:35:58 GMT -5
they do work, the only thing i see about them is they are prone to break,,ours broke & we put the stock key back in slowed our times down .10 of a second in 200 ft.so they do work,there is a timing plate available now i hear that would allow you to adjust your timing without removing the flywheel...are you all getting these yet kurt?  |
|
|
|
Post by Kurt on Nov 29, 2003 23:49:35 GMT -5
we've sold the Vito's ones before and nobodys complained about problems yet...
|
|
|
|
Post by dragginblaster on Nov 30, 2003 9:57:42 GMT -5
;D we may have too much H.P, lol we also shattered our clutch basket  |
|
|
|
Post by 265Blaster on Dec 1, 2003 21:09:14 GMT -5
I am pretty sure that vitos is the only one that makes degree keys.
|
|
Krazeeun
Private
Suck My Junk
Posts: 198
|
Post by Krazeeun on Dec 3, 2003 20:24:57 GMT -5
;D we may have too much H.P, lol we also shattered our clutch basket Yes. Running very high hp in something like this and things are GOING to break, i've friend my clutch and broke many other things. Its the price of the game, $$ but hell its fun. Vitos is the only one that makes them. I have yet to hear of anyone else. |
|
|
|
Post by jody504 on Dec 9, 2003 19:37:11 GMT -5
I have ran them it won't hurt the engine. it helps a little with the exellaration. but if you have a lawnmower shop around you can get what they call a offset key. you just have to know the size they cost about 2.50 to 3.00 apiece alot cheaper than 24.95 from vito.
|
|
