|
|
Post by checkoutmyROOST on Mar 27, 2005 22:22:04 GMT -5
Where do I take my bike to get the frame painted? Or is there a was I can do it myself with a certain type of paint?  |
|
|
|
Post by HellStorm on Mar 27, 2005 23:51:12 GMT -5
i just bought a $40 paint gun and went down to a paint store and bought some metalic flake paint. It might cost you alot but im sure it will be cheaper than getting a shop to do it. As long as you mix it right and ur not an idiot you should be able to paint it up pretty good. I did mine with no runs or anything.
|
|
|
|
Post by checkoutmyROOST on Mar 28, 2005 0:18:03 GMT -5
Alright thanks man I'm gunna try that out.  |
|
|
|
Post by kdogg43 on Mar 28, 2005 0:28:23 GMT -5
powder coating your frame is the best, from wat i think i know, you put a charge to your frame and the paint sticks to that and you bake your bike frame for hours and it's the best you can do if your serious about a paint job
|
|
|
|
Post by kittsy8 on Mar 28, 2005 1:49:28 GMT -5
is urs powdercoated kev
|
|
|
|
Post by E3Eblaster00 on Mar 28, 2005 2:16:53 GMT -5
pc ain't that bad...it's only like 200 bucks if that at some places...and much much more durable
|
|
|
|
Post by HellStorm on Mar 28, 2005 14:18:35 GMT -5
Yeah if you have the money powder coating is better. Its also more durable. It will probably cost you about $300 for frame Aarms swingarms and all the other small parts.
im powder coating my next Blaster.
|
|
|
|
Post by checkoutmyROOST on Mar 28, 2005 14:52:46 GMT -5
To get it powder coated, do I have to take the frame only to the shop or could i just take my whole bike and they can take everything off? Because I know if I tried to strip my bike down to the frame I would either lose a lot of parts or not be able to get it back together.
|
|
|
|
Post by yfsrider on Mar 28, 2005 15:52:49 GMT -5
you have to strip it down. its not hard
|
|
