Krazeeun
Private
Suck My Junk
Posts: 198
|
Post by Krazeeun on May 28, 2003 13:49:48 GMT -5
Question: What can I do for free to make my Blaster look better?
Answer:
Cut The Fenders Remove The Headlight Remove The Warning Labels. Remove the Black plastic Mud Guards. Remove the stock nerfs (foot guards).
Question: How Do I make my aluminum shine?
Answer: Use aluminum polish and scrub real well untill you've got the desired shine.
Question: What parts can I polish on my quad?
Answer: First - You can remove paint from the:
Thumb Throttle Cap/Assembly Front Brake Lever/Perch, And Clutch Lever/Perch
Then polish real well.
Question: What can I do to make my plastic shine?
Answer: You Can use any automotive plastic products shiner, such as Son Of a Gun, Armorall, Forumla 2001, And so foarth.
|
|
Steve
Sergeant
i can do that
Posts: 555
|
Post by Steve on Jun 16, 2003 16:19:56 GMT -5
thanks
|
|
|
Post by Quadguy on Jul 25, 2003 21:10:36 GMT -5
Thats a lot of parts for free.
|
|
Krazeeun
Private
Suck My Junk
Posts: 198
|
Post by Krazeeun on Jul 25, 2003 23:33:52 GMT -5
Right On.
|
|
|
Post by Quadguy on Jul 28, 2003 14:20:24 GMT -5
How about changing the color of your hubs?
|
|
|
Post by JeSse on Jul 28, 2003 22:17:43 GMT -5
u have to buy paint so its not a free cosmetic
|
|
|
Post by Quadguy on Jul 28, 2003 23:33:08 GMT -5
Yeah, I would of guesed but I always have paint laying around the house.
|
|
|
Post by JeSse on Jul 29, 2003 9:25:45 GMT -5
same here
|
|
|
Post by Quadguy on Aug 4, 2003 16:21:47 GMT -5
How about triming a little of the back fender?
|
|
|
Post by |~RaYne~| on Sept 12, 2003 11:33:57 GMT -5
if you have white fenders like me do you see where the dirt has wore in to the feanders? this befour and after Q: how do i get dirt out of my fenders? A 1:take soft scrub and put it your fenders and take a sponge with a rough side and take the rough side and rub it in really well or do disered clean. then spary of with hose then wash as normal with soap and water then dry with a towle a 2: take that bathroom cleaner comet and put on a wet cloth or sponge and rub into fenders really well or to dieser... then let set for about 10min to 15min wile your waiting mix comet in with your soap and water mix up very well then wash as normal.. work very very good
|
|
|
Post by FitzBlaster on Sept 12, 2003 18:06:05 GMT -5
Yeah, I would of guesed but I always have paint laying around the house. standard metal paint will stay on hubs? sorry for my english
|
|
Krazeeun
Private
Suck My Junk
Posts: 198
|
Post by Krazeeun on Sept 12, 2003 22:27:41 GMT -5
Yeah, I would of guesed but I always have paint laying around the house. The paint still isnt free. Just cause you dont pay for it then doesnt mean its free, you'll use it up - therefore needing more paint in the future for something else, which will in the long run cost. Now that is really far fetched, but I thought i'd do a little reasoning while im at it. ;D
|
|
|
Post by |~RaYne~| on Sept 14, 2003 9:46:12 GMT -5
isnt he the smart kid...lol just messing
|
|
|
Post by |~RaYne~| on Sept 14, 2003 12:54:56 GMT -5
silver side case: ok you see on my side case right below my kick starter where is is silver? all you got to do is takea very very fine grit sandpaper like 1000 grit and sand the paint off it may take a little wile but it looks so much better... then once you get it sanded down just take and wipe it down with lacker thiner and let it dry then wipe it off with a dry towel and put about 3 coats of clear coat paint on it you dont have to put the paint on it but it makes it shine better...so good luck
|
|
|
Post by |~RaYne~| on Sept 17, 2003 6:04:10 GMT -5
it works very good and you got to keep it clean or it will corrode really bad so get some mothers alulum. ploish and that will fix it right up just polish it right after you wash it every time ~~Rayne~~
|
|