|
|
Post by metalupyourass on Jan 22, 2004 18:45:39 GMT -5
thats cool u think there about 10 bucks?
|
|
|
|
Post by quadracer34 on Jan 22, 2004 22:00:15 GMT -5
thats cool u think there about 10 bucks? i forget, there was a post on BHQ awile back, i think like 5.00.. not sure though.. |
|
|
|
Post by metalupyourass on Jan 22, 2004 22:03:25 GMT -5
lol im going to autozone anyway so im going to look when i go.  |
|
|
|
Post by 265Blaster on Feb 5, 2004 16:20:10 GMT -5
I got +2 a-arms , banshee spindles and raptor rims flipped and they dont rub at all. But i think the banshee discs are smaller.
|
|
|
|
Post by metalupyourass on Feb 5, 2004 16:33:21 GMT -5
I went to autozone but they told me that there are a lot of diferent sizes so I dint get any cuz i dint know which size but id rather just get wheel spacers and then get a arms later on.
|
|
|
|
Post by Numidian on Feb 24, 2004 13:32:38 GMT -5
wheel spacers will bend studs....when you just flip the rim you're increasing the leverage on the spindle, this is ok because the spindle can handle it.... But when you put spacers on the pressure goes onto the studs, because know there is an inch of stud that is between the wheel and the spindle...this is bad, because the stud isn't able to handle that type of pressure...
|
|
Yfz450-Racer
Private
Your Fast But Im Faster!!! Yeah!!!
Posts: 155
|
Post by Yfz450-Racer on Feb 24, 2004 18:45:14 GMT -5
heyt will it make them wider in the back
|
|
