|
|
Post by Nine07Racing#812AK on Jan 22, 2005 2:32:13 GMT -5
I know they fit but I hear about them lifting the rear end up a lil bit so can I like do anything to lower it a lil bit cus i mite get a 250r rear shock or an ex rear shock but they go for to high it seems like when i can get a r shock for 20-25$ so could i get it shortened or anything?
|
|
|
|
Post by VitosBlaster on Jan 22, 2005 5:18:56 GMT -5
Did you ready the stickys posted above? If not....then they might answer your questions.
|
|
|
|
Post by MXRACER708 on Jan 22, 2005 18:34:30 GMT -5
u can set the sag on the R shock   |
|
|
|
Post by YamahaFreak131 on Jan 22, 2005 22:29:51 GMT -5
Go over to BHQ and PM Phragle, he can answer all your questions and he does service and shorten 250r shocks.
|
|
|
|
Post by Nine07Racing#812AK on Jan 22, 2005 22:52:47 GMT -5
ya i seen he shortend shocks for 5$ |
|
|
|
Post by yfsrider on Jan 22, 2005 23:20:20 GMT -5
mine is just fine with the r shock, take a look for yourself...   it sits 2 inches higher but then when i sit on it, it sags to stock ride height  |
|
|
|
Post by MXRACER708 on Jan 23, 2005 17:46:47 GMT -5
exactly |
|
|
|
Post by Nine07Racing#812AK on Jan 23, 2005 18:22:11 GMT -5
thanks for the pics i think ill get an r shock than cus there alot cheeper than ex shocks and they work about the same just a lil more modification but i got a dad whos a fabber so its all good |
|
|
|
Post by joshwestmx5 on Jan 23, 2005 18:26:32 GMT -5
right but custom axis or elka I think would work better I think but it up to you
|
|
|
|
Post by Nine07Racing#812AK on Jan 23, 2005 18:28:06 GMT -5
ya for like 700-800 $ i think not im just gonna get it revalved by desiri racing or phragle so it can be close to an elka then ill be gettin some elka fronts late this year with piggybacks |
|
|
|
Post by joshwestmx5 on Jan 23, 2005 18:33:43 GMT -5
yeah as long as you get them revalved you be good to go.
|
|
|
|
Post by yfsrider on Jan 24, 2005 3:30:21 GMT -5
thanks for the pics i think ill get an r shock than cus there alot cheeper than ex shocks and they work about the same just a lil more modification but i got a dad whos a fabber so its all good there is less modding required for the R shock...all you have to do is grind some of the bushing off the top mount and drill out the bttom shock mount and the mount ont he swingarm and use the right size bolt |
|
|
|
Post by kdogg43 on Jan 24, 2005 8:19:58 GMT -5
i'd forget all the shock rebuild bull crap, and just buy a new elka or some other brand of shock, and set it up for you, don't waste money re freshing another shock
|
|
|
|
Post by Nine07Racing#812AK on Jan 24, 2005 13:31:32 GMT -5
i will next october but not this time of the year i just need a shock for this race season |
|
|
|
Post by MXRACER708 on Jan 24, 2005 16:49:14 GMT -5
yeah or tighten the rear stock shock all it has.....my friend did that and actually it road well and never bottomed out
|
|
.jpg)
