|
|
Post by XCESIVEMOTRSPORTS on Nov 27, 2004 21:18:07 GMT -5
DOES ANYONE AGREE WITH? ME IF A STOCK BANSHEE AXLE WILL FIT, THEN PUTTING ON AN AFTERMARKET BANSHEE AXLE WILL ALSO FIT, BUT IT WILL JUST MAKE IT WIDER. IT WILL BE LIKE A BLASTER 7 INCH OR SO EXTENDED AXLE? ANYONE AGREE OR HAVE ANY COMMENTS, IS THERE ANYTHING ELSE I WILL NEED CAN I JUST ORDER A BANSHEE AXLE AND SLIP IT RIGHT IN IM NOT GONA HAVE TO BUY HUBS OR ANYTHING ELSE.? SOMEONE LET ME KNOW
|
|
|
|
Post by mxblaster88 on Nov 28, 2004 16:30:22 GMT -5
Yes the banshee axle will fit with some minor changes to your rear brake setup. (on 88-02) It will fit right in on 03-05 models. A stock banshee axle adds 2 inches TOTAL over a stock blaster axle, and an aftermarket +4 banshee axle will add 6 inches over a stock blaster axle. Now get that through your heads!!!  |
|
|
|
Post by XCESIVEMOTRSPORTS on Nov 28, 2004 17:14:02 GMT -5
OK, EXCELLENT. SO THATS WHAT IM GOING TO DO I AM GOING TO ORDER AN AFTERMARKET G -FORCE AXLE FOR A BANSHEE, AND THROW IT ON THE BLASTER. I WILL HOPEFULLY ORDER IT MONDAY AND I WILL LET YOU ALL KNOW WHAT I THINK OF IT, IF I GET A CHANCE TO RIDE IT WITH IT ON, THANKS FOR THE HELP.  |
|
|
|
Post by kheft on Dec 3, 2004 13:17:46 GMT -5
Why the would a aftermarket axle be any different then stock? You have to use brakes off a banshee or something that has a floating caliper. The blaster has a Floating disc and fixed caliper. The banshee has a floating caliper and fixed disc. If both are fixed you woull have very bad brake broblems and 90% chance they will quit working all to gether . If they are both fixed the pad wear is uneven ect.
|
|
|
|
Post by BlackBlaster on Dec 3, 2004 18:29:21 GMT -5
it should fit...if itll fit on a banshee...and a stock banshee will fit on blaster..go for it
idk why you want to add that much to the back end...its going to look akward IMO with a wide back and somewhat smaller front
by the way...you can add a total of 9.3 inches to a blasters width and that would equal a 50" spread
stock is 40.7"
|
|
|
|
Post by blaster99 on Dec 3, 2004 20:09:08 GMT -5
ALL SHEE AXLES FIT OEM OR AFTERMARKET THEY ALL FIT
|
|
|
|
Post by kheft on Dec 3, 2004 22:20:34 GMT -5
many people run aftermarket shee axles not like anything is different because its aftermarket. Many people run them. But you dont need one a +4 blaster axle is perfect you dont the rest is just overkill with the shee axle.
|
|
Adam
Private
This Blaster Will Soon Be Running On 4 Cylinders...
Posts: 279
|
Post by Adam on Dec 9, 2004 16:35:55 GMT -5
so can someone tell me what all together i need to make a banshee axle work?
im goona need to do something with my brakes...what is the cheepest way to make them work?
and if the axle comes with rear hubs will i need new rims or is the banshee pattern the same as blaster?
|
|
|
|
Post by MXRACER708 on Dec 12, 2004 18:36:25 GMT -5
i have a banshee and i tried it one time it made it 3 in wider and looked mor race ready
|
|
