Tony19
Sergeant
HAMMERDOWN RACING
Posts: 406
|
A-Arms
May 16, 2003 21:34:47 GMT -5
Post by Tony19 on May 16, 2003 21:34:47 GMT -5
Does anybody know where I can buy aftermarket +2 a-arms for my 02 Yamaha Blaster? Also if you are selling some write back!!
|
|
|
|
A-Arms
May 17, 2003 0:12:29 GMT -5
Post by Kurt on May 17, 2003 0:12:29 GMT -5
Did you look in our Products section? go to www.projectblaster.com and then to Products, then to A-arms. Our a-arms are listed on there. I highly reccomend the Diamond Racing +2,+1 arms.  |
|
Tony19
Sergeant
HAMMERDOWN RACING
Posts: 406
|
A-Arms
May 17, 2003 9:41:02 GMT -5
Post by Tony19 on May 17, 2003 9:41:02 GMT -5
How much are they? I would want the +2.
|
|
|
|
A-Arms
May 18, 2003 0:32:31 GMT -5
Post by Kurt on May 18, 2003 0:32:31 GMT -5
|
|
|
|
A-Arms
May 18, 2003 22:15:25 GMT -5
Post by Malisiak05 on May 18, 2003 22:15:25 GMT -5
Hey i also have a question. Did laegar come out with blaster +3+1 a arms. Thats what i have heard.
|
|
|
|
A-Arms
May 23, 2003 19:04:13 GMT -5
Post by spiderman884 on May 23, 2003 19:04:13 GMT -5
Hey i also have a question. Did laegar come out with blaster +3+1 a arms. Thats what i have heard. yea leager makes them but i hear thy go for around 800 bucks !! |
|
|
|
A-Arms
May 23, 2003 19:08:56 GMT -5
Post by JeSse on May 23, 2003 19:08:56 GMT -5
whats the +3+1 stuff whats that mean
|
|
|
|
A-Arms
May 23, 2003 19:12:38 GMT -5
Post by Brandon on May 23, 2003 19:12:38 GMT -5
HSDRacing also makes a set of +3+1 a arms for about 200 cheaper than the Laegar's. I'm not trying to kill one of Kurts deals tho. But eventually that's what I want. I want the widest I can possibly get.
Brandon
|
|
|
|
A-Arms
May 23, 2003 23:38:28 GMT -5
Post by Kurt on May 23, 2003 23:38:28 GMT -5
whats the +3+1 stuff whats that mean +3 inches wider, +1 inch forward |
|
|
|
A-Arms
May 30, 2003 2:26:59 GMT -5
Post by criminalpoet on May 30, 2003 2:26:59 GMT -5
HSDRacing also makes a set of +3+1 a arms for about 200 cheaper than the Laegar's. I'm not trying to kill one of Kurts deals tho. But eventually that's what I want. I want the widest I can possibly get. Brandon $725 for the HSD +3s that they make for the stock Blaster. $690 for the HSD+3s for non stock Blaster but you have to use Banshee or Warrior breaks with these which means more $.. I have spent the week researching a-arms and shocks as that is my next mod. I think I would rather go with the Diamond Racing a-arms and put that remaining $200 twards some good after market shocks. But this is just my opinion! However if money is no concern than go with it if you like. |
|
|
|
A-Arms
May 30, 2003 16:51:29 GMT -5
Post by Brandon on May 30, 2003 16:51:29 GMT -5
The front hydro brake parts are $550.00 ( 2 spindles, 2 calipers, 2 hubs, 2 rotors, & 1 master cyl )
The Blaster a-arm kit including tie rods is $595.00
That's what HSD sent me in an email as a quote. I dont know where you're getting your info from but you got it off by about a hundred bucks on each at least.
Brandon
|
|
|
|
A-Arms
May 31, 2003 1:11:19 GMT -5
Post by criminalpoet on May 31, 2003 1:11:19 GMT -5
The front hydro brake parts are $550.00 ( 2 spindles, 2 calipers, 2 hubs, 2 rotors, & 1 master cyl ) The Blaster a-arm kit including tie rods is $595.00 That's what HSD sent me in an email as a quote. I dont know where you're getting your info from but you got it off by about a hundred bucks on each at least. Brandon Damn! I guess they must give everyone a different price. Here is a copy of one of there e-mails that they sent to me. "Hi Jose, Strong Arm +3 a-arm kit includes tie rods $725.00 (for stock brakes) Elka dual rate shocks from $541.00 Sincerely, Mark LoScerbo www.HSDracing.com(204) 779-9728" I deleted the other e-mail in which they told me that the non stock set is $690 + the additional $550 for the brake set up from them. So to answer your question as to where I am getting my info from my answer would be from the horses mouth. BTW, I also called to Canada and they gave me the same quotes over the phone as well. A friend in the Blasterz, Jose |
|
Cramer727
New Recruit
Draw me a blood bath.....
Posts: 27
|
A-Arms
Jun 18, 2003 23:36:41 GMT -5
Post by Cramer727 on Jun 18, 2003 23:36:41 GMT -5
too much of a good thing is bad for a little bike the blaster. but i cant really say anything bout the +3's cause ive never ridden a blaster that wide. my Diamond racing +2's are wide as shit and they work great. Plus you would have 2 get stiffer shocks because your putting alot more force on them since your wider.
|
|
|
|
A-Arms
Jun 22, 2003 23:46:06 GMT -5
Post by Kurt on Jun 22, 2003 23:46:06 GMT -5
yea, that's excatly right Billy. It's not worth it to get +3" extended a-arms at all unless you have money coming out your ass and you just want to experiment with them. Take it from us, we race every weekend in one of the most competitive areas in our country and all of the racers use +2" extended a-arms. This would go to show that if the +3" ones were that good, somebody would have them, but nobody does. Get the Diamond Racing +2",+1" extended a-arms!
|
|
|
|
A-Arms
Jun 23, 2003 9:12:38 GMT -5
Post by JeSse on Jun 23, 2003 9:12:38 GMT -5
ya i never seen anyone with +3+1 on there blaster
|
|
