k&n...

jake03 New Recruit '05 Blaster Posts: 18	k&n... Mar 28, 2005 16:54:25 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by jake03 on Mar 28, 2005 16:54:25 GMT -5 hey, i got my k&n a couple weeks ago, and the lid for it(it came with it) dosent fit quite rite, it seems to be a little small. im worried about dirt getting in to the engine. please post any helpful info! thanks -jake

BlRacing619 Sergeant Just Ride Posts: 477	k&n... Mar 28, 2005 21:00:42 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by BlRacing619 on Mar 28, 2005 21:00:42 GMT -5 i got mine too..it will seem small u just have to push it on...
	2003 Almost MX BLASTER..Yeah..lol

VitosBlaster Private Posts: 190	k&n... Mar 28, 2005 23:42:29 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by VitosBlaster on Mar 28, 2005 23:42:29 GMT -5 Make sure you have the lid on correct and no dirt will get in. But if you ride in muddy/dusty conditions I recommend an outerwear for the filter. You wouldnt have a problem with that if you had a foam filter.
	Modified 1999 Yamaha Blaster Secret Project

spish Private Posts: 265	k&n... Mar 29, 2005 3:53:19 GMT -5 Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top Post by spish on Mar 29, 2005 3:53:19 GMT -5 You gotta just push down hard, it will fit I had the same problem but eventually went with the UNI filter after seeing my piston during a rebuild. I had been sucking sand and dust through the K&N and screwed up the piston. Good luck!!
	[glow=red,2,300]www.truboost.com[/glow]