|
Post by MAcello on Feb 28, 2005 15:12:54 GMT -5
I was wondering if anyone was running the forged super stock piston in their bike? Also was wondering how it runs with it and have you had any promblems with it?Also if you got the kit how do the gaskets hold up?
|
|
|
Post by MXRACER708 on Feb 28, 2005 19:14:54 GMT -5
i am i have a forged in my 240 vitos kit it is stronger than the cast by 5x but u will just need to warm up your bike longer for the rings to expande for the forged but other than that they are great really strong ive had mine for about 3 months so far and it looks brand new i highly recommend them (vitos is 20 min away from my house i hyave a vitos complete motor from bottom up vitos all the way if someone has a problem to bad for you in my opinoin)
|
|
|
Post by FourPlayBlaster11 on Mar 4, 2005 23:21:03 GMT -5
vitos = EXPLOSION ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D ;D
|
|
|
Post by mueller77 on Mar 5, 2005 11:16:09 GMT -5
i dunno much about vitos but i have heard good things and bad things bout vitos Nice fourplayblaster11 with the ;D ;D ;D lol
|
|
|
Post by kawi on Mar 5, 2005 13:37:14 GMT -5
The superstock pistons are wiseco pistons that have been ported by vitos. youll get likea 3hp gain.
|
|
|
Post by blaster240mxer on Mar 5, 2005 13:41:02 GMT -5
i think vitos is pretty good
|
|
|
Post by FourPlayBlaster11 on Mar 5, 2005 18:11:01 GMT -5
i think they are ok if they're built right, but i think the quality of the work verries too much. and i really doubt that it will give u 3 hp, show me the dino.... lol thanx i just kinka went ape with the ;D ;D ;D rayne was sitting enxt to me so yea i thought i go off..
|
|
|
Post by kawi on Mar 5, 2005 20:22:29 GMT -5
i think they are ok if they're built right, but i think the quality of the work verries too much. and i really doubt that it will give u 3 hp, show me the dino.... lol thanx i just kinka went ape with the ;D ;D ;D rayne was sitting enxt to me so yea i thought i go off.. Dino?
|
|
|
Post by Max on Mar 5, 2005 20:24:03 GMT -5
Dyno
|
|
|
Post by kawi on Mar 5, 2005 20:28:46 GMT -5
I know maxxy poo
|
|
|
Post by MXRACER708 on Mar 5, 2005 20:30:35 GMT -5
i have had no probs wit my vitos piston 240bigbore or anything
|
|
|
Post by FourPlayBlaster11 on Mar 7, 2005 16:21:41 GMT -5
Yes DINO, im special, 4 concussions and i have an excuse
|
|
|
Post by Extremeblaster01 on Mar 8, 2005 16:19:23 GMT -5
Alright, one you will notice a different with the vitos piston because its ported and will uncover the exhaust port a little more..You CANNOT run this piston with a port job though, unless the porting is setup to run with that exact piston..If you run that piston and porting at the same time you'll have problems.. i have had no probs wit my vitos piston 240bigbore or anything That piston works good with the 240kit you have because your 240 kit is bairly ported any, thats why it works good..But if you ever get your motor ported properly you'll will have to ditch that piston.
|
|
|
Post by kawi on Mar 8, 2005 17:22:27 GMT -5
Alright, one you will notice a different with the vitos piston because its ported and will uncover the exhaust port a little more..You CANNOT run this piston with a port job though, unless the porting is setup to run with that exact piston..If you run that piston and porting at the same time you'll have problems.. That piston works good with the 240kit you have because your 240 kit is bairly ported any, thats why it works good..But if you ever get your motor ported properly you'll will have to ditch that piston. he has hetrick porting on the 240 lol You can set up the porting to run with the pistons though.
|
|
|
Post by MXRACER708 on Mar 8, 2005 21:00:27 GMT -5
exatcly we had vitos mod the exaust port on the top of the piston to match the minor port work we got from them
|
|