|
|
Post by ~Smart-Parts~ on Jan 31, 2005 10:40:31 GMT -5
Does anyone know any good companies that do Hi Rev porting, because im lookin for a new cylinder for this summer, and i race TT thats y it has to be hi rev  |
|
|
|
Post by ~Smart-Parts~ on Jan 31, 2005 10:43:43 GMT -5
And im also lookin for a hi Rev pipe, sumthing like the lrd but better if there is sumthing better |
|
|
|
Post by kawi on Jan 31, 2005 15:40:05 GMT -5
|
|
|
|
Post by ~Smart-Parts~ on Jan 31, 2005 15:53:31 GMT -5
Does anyone know if HWD make a hi rev Cylinder
|
|
|
|
Post by arkblaster12 on Jan 31, 2005 15:57:50 GMT -5
Duncan does really good work. They are a little pricey but you get what you pay for. Go with cpcustoms if you are on a tighter budget. They have the same headmod, but not porting. Like already mentioned they have a high rev pipe to match their porting. Also where do you live, and what series will you be doing?
|
|
|
|
Post by ~Smart-Parts~ on Jan 31, 2005 15:59:35 GMT -5
Duncan does really good work. They are a little pricey but you get what you pay for. Go with cpcustoms if you are on a tighter budget. They have the same headmod, but not porting. Like already mentioned they have a high rev pipe to match their porting. Also where do you live, and what series will you be doing? I live in Iowa, and I race TT or same as flat track |
|
|
|
Post by arkblaster12 on Jan 31, 2005 16:03:04 GMT -5
Yea I know what TT is I race it too. I was asking like where will you be racing. Like any nationals....
|
|
|
|
Post by ~Smart-Parts~ on Jan 31, 2005 16:13:18 GMT -5
no im not that good
|
|
|
|
Post by arkblaster12 on Jan 31, 2005 16:31:35 GMT -5
ohhh, there not that bad...
|
|
|
|
Post by blaster99 on Jan 31, 2005 16:43:15 GMT -5
ove always wanted to race tt i race around the feild in my back yard
|
|
|
|
Post by Max on Jan 31, 2005 16:52:59 GMT -5
Go onto the street or a go-kart track...  |
|
|
|
Post by Jarrett#20 on Jan 31, 2005 17:14:45 GMT -5
Yea Duncan racing does real good work.  |
|
|
|
Post by kawi on Jan 31, 2005 20:26:00 GMT -5
Does anyone know if HWD make a hi rev Cylinder Yeh just ask for a pd#3 topend job. With Head mod It costs almost $400 |
|
|
|
Post by MXRACER708 on Jan 31, 2005 20:51:58 GMT -5
the heads look sweet form hwd
|
|
|
|
Post by blaster99 on Feb 2, 2005 7:19:04 GMT -5
Go onto the street or a go-kart track... i race carts ill put a pic of it up later |
|
